Author Archives: Bhavank Patel

V15: PnP Multicast Debug

In order for your 3CX PBX is able to answer PnP requests for provisioning purposes the following requirements must be met: 3CX must run on SIP Port 5060 3CX must be able to join the multicast group The IP Phone and PBX must be in the same local LAN subnet Switch must support MultiCast Your

Read More

asterisk-3cx-bridging

Bridging 3CX with an Asterisk PBX

Introduction In this document we are going to demonstrate how to create a bridge between a 3CX (V14) and an Asterisk PBX. We will assume both systems are in the same local LAN. Setting up 3CX From the 3CX Management Console go to “Bridges” and “Add Bridge”.       In the “Add Bridge” form fill

Read More